Hybrid Flooring · 7mm · Sydney, NSW
Herringbone 7.0 Hybrid Flooring
Herringbone 7.0 is a 7mm rigid hybrid floor in short 600 x 150mm planks, laid in a herringbone pattern, with a Unilin UniZip lock that does away with separate left and right planks. It comes in six oak and Australian timber looks, with a 25-year residential warranty from the supplier. We supply and install herringbone hybrid flooring across Sydney, from Parramatta and Concord to Castle Hill and Penrith. Choose a colour below, or tell us about your rooms and we’ll call you to talk it through.
Herringbone colours
The range
About Herringbone 7.0 Hybrid Flooring
Herringbone 7.0 is a 7mm rigid hybrid floor made of short 600 x 150mm planks that are laid in a classic herringbone pattern. It has a rigid core, a 0.55mm wear layer under a UV coating, a micro-bevelled edge and a 1.5mm IXPE underlay already attached. Its Unilin UniZip lock lets the short side of each plank click into the long side of the next, so a pattern that used to need separate left and right planks is now a single plank. It sits among our hybrid flooring ranges as the one for people who want a feature floor.
The manufacturer describes Herringbone 7.0 as waterproof and lists it for interior areas of private homes and commercial establishments, with a 25-year warranty for private use and a 5-year warranty for commercial use from the supplier, subject to the warranty terms. If you prefer straight planks, see our Elite 6.0mm and Urban 6.5mm ranges. We supply and install herringbone hybrid flooring in homes and businesses across Sydney and its suburbs.
Pick a colour
Herringbone 7mm Colours
Every Herringbone colour has the same 7mm construction and plank size. Click a colour to see it up close, with its details and a quote form. Seeing a sample in your own light is the easiest way to choose, so ask us when you call.
Colours are shown as photographed and may look different in your home. Product images may differ from the actual product.
The details
Herringbone 7mm Specifications
Here’s the technical detail for the whole Herringbone range, from the manufacturer’s information. It’s the same for every colour.
| Specification | Herringbone 7.0 |
|---|---|
| Type | Rigid hybrid floating floor, with a rigid core, an LVT balance layer and an attached cushion pad |
| Thickness | 7mm, including a 1.5mm IXPE underlay |
| Plank size | 600 x 150mm, laid in a herringbone pattern |
| Pack size | 0.9 m² (10 planks) |
| Wear layer | 0.55mm |
| Surface finish | UV coating, antibacterial |
| Edge | Micro-bevelled |
| Locking system | Unilin UniZip: the short side of a plank locks into the long side of the next, so there are no left and right planks to mix up |
| Installation method | Floating |
| Water performance | Described by the manufacturer as waterproof, with a multi-layer rigid core |
| Wet areas | The manufacturer says it can be used throughout the interior, including bathrooms and laundries. We check the room and the subfloor before we recommend it |
| Acoustic rating | 5 Star AAAC |
| Slip resistance | P2 in wet pendulum testing to AS 4586:2013 |
| Fire reaction | Tested to AS/ISO 9239-1:2003, with a critical radiant flux (CRF) of 7.0 kW/m² |
| VOC rating | A+ |
| Applications | Interior areas of private homes and commercial establishments |
| Warranty | 25 years for private use and 5 years for commercial use, from the supplier, subject to the warranty terms |
Specifications and test results are from the manufacturer’s published information, including its 2024 brochure. Product images may differ from the actual product, so ask us for a sample before you decide.
Why choose it
Herringbone Features and Benefits
Here’s what Herringbone gives you, and what to keep in mind.
A herringbone floor without the puzzle
Herringbone used to mean two sets of planks, left and right, and plenty of room for mistakes. The UniZip lock lets the short side of each plank click into the long side of the next, so there is only one kind of plank to lay.
A rigid, waterproof core
The manufacturer describes Herringbone 7.0 as waterproof, with a multi-layer rigid core that keeps the planks stable and flat. It isn’t a reason to leave spills, so we still advise wiping them up.
A tough, scratch-resistant surface
A 0.55mm wear layer under a UV coating is what the manufacturer credits for a surface that resists scratches and scuffs, which matters on a feature floor people walk across every day.
Comfortable and quiet underfoot
The planks have a 1.5mm IXPE underlay attached for comfort, and the manufacturer lists a 5 Star AAAC acoustic rating.
Tested for slip and fire
On the manufacturer’s test results, the range achieved a P2 wet slip classification (AS 4586:2013) and a critical radiant flux of 7.0 kW/m² (AS/ISO 9239-1:2003).
Low emissions and a long warranty
The range has an A+ VOC rating, and the supplier gives a 25-year warranty for private use and 5 years for commercial use, subject to the warranty terms.
Keeping it looking good
Looking After Your Herringbone Floor
A hybrid floor is easy to look after with a few simple habits. These are general care tips in our words, so follow the manufacturer’s instructions for your floor too.
Sweep or vacuum regularly
Use a soft broom or a soft vacuum head to clear grit, which can dull the surface over time. Avoid vacuum heads with hard beater bars.
Clean with a damp mop
Use a damp, well wrung-out mop and a gentle floor cleaner. Even though the core is waterproof, avoid flooding the floor, and avoid abrasive cleaners and steam mops.
Wipe up spills promptly
Herringbone has many short joins, so wiping up spills quickly is the habit that protects any hybrid floor.
Protect the surface
Put mats at entrances and felt pads under furniture, lift furniture rather than dragging it, and keep pets’ claws trimmed.
Mind the sun
Strong, direct sun can fade or warm the colour of any floor. Use curtains or blinds on sunny windows.
Follow the manufacturer’s instructions
These are general care tips. The manufacturer’s own instructions apply to your floor, and we can pass them on with your quote.
How it works
Herringbone 7mm Installation in Sydney
Herringbone is the most detailed floor pattern we lay. The UniZip lock makes the planks simple, but the pattern still has to be set out and cut with care, and that’s where we spend our time. We install Herringbone across Sydney, and you can see where on our service areas page. Find out more about our floor installation service.
We measure and plan the pattern
A herringbone floor is set out from the centre of the room, so we measure carefully, decide the direction of the pattern, and plan how it will meet each wall.
We check and prepare the subfloor
The manufacturer says the floor must be clean, level, smooth and dry, with no large cracks. We check what is under your current floor and tell you what preparation it needs before we quote.
We lay out the pattern and start the first rows
We start from a centre line, because the pattern follows the first rows, and set the planks with the UniZip lock, short side into long side.
We cut and fit the edges
Herringbone needs more cutting than a straight-plank floor, especially at the walls, doorways and corners. This is where the time goes, and where care shows.
We finish the details
Trims, door transitions and edges are fitted, the floor is cleaned and checked, and the room is ready to use.
Questions we get asked
Herringbone 7mm FAQs
What is herringbone flooring?
Herringbone flooring is made of short rectangular planks laid in a zig-zag pattern, with the square-cut end of each plank meeting the side of the next. It is different from chevron, where the plank ends are cut at an angle so the pattern forms continuous V shapes. Herringbone 7.0 is a herringbone floor, with 600 x 150mm planks.
Is Herringbone 7.0 waterproof?
The manufacturer describes the range as waterproof, with a multi-layer rigid core. We advise wiping up spills promptly, and we check each room before we recommend a floor.
Can I use Herringbone 7.0 in a bathroom or laundry?
The manufacturer says it can be used throughout the interior, including bathrooms and laundries. We check the room, the subfloor and the plumbing before we recommend it, and we tell you plainly if another floor would suit the room better.
What is UniZip, and why does it matter?
UniZip is the Unilin locking system used on Herringbone 7.0. The short side of a plank locks into the long side of the next, so there are no separate left and right planks to mix up, which removes a common source of mistakes on herringbone floors.
Is herringbone harder to install than a straight-plank floor?
It takes more care. The pattern has to be set out from the centre, and there is more cutting at the walls, so a professional installer is the safer choice. The UniZip lock makes the planks themselves simpler to lay.
How much extra flooring do I need for a herringbone pattern?
A herringbone floor usually needs a bigger allowance for cuts than a straight-plank floor, because of the angles at the walls. We measure your rooms and advise the amount when we quote.
How thick is Herringbone 7.0, and what size are the planks?
Herringbone 7.0 is 7mm thick including a 1.5mm IXPE underlay, and each plank measures 600 x 150mm. A pack covers 0.9 m² with 10 planks.
What warranty comes with Herringbone 7.0?
The supplier gives a 25-year warranty for private use and a 5-year warranty for commercial use, subject to the warranty terms. Ask us for the full terms when you choose your colour.
Can I use Herringbone 7.0 in a commercial space?
The manufacturer lists it for interior areas of private homes and commercial establishments, with a 5-year commercial warranty. Tell us about your space and we’ll advise.
Do you install herringbone flooring in Sydney?
Yes. We supply and install herringbone hybrid flooring across Sydney, NSW, including Parramatta, Concord, Strathfield, Castle Hill, Penrith and the suburbs around them. Tell us your suburb and we’ll confirm we can get to you.
Ready when you are
Get a Quote for Herringbone Hybrid Flooring
Tell us your suburb, the rooms you’re thinking about and the colour you like. We’ll call you, talk through the options and put a quote together for your place.
- Call+61 415 779 146
- Email[email protected]
- ShowroomShop 2B, 121-127 Railway Parade, Granville NSW 2142
Areas we service
Thanks, we’ve got it.
Our team will call you to talk about your flooring.













































