What is herringbone flooring?
Herringbone flooring is made of short rectangular boards laid in a zig-zag pattern, with the square end of each board meeting the side of the next. It is one of the classic parquet patterns, and our herringbone floorboards are engineered oak boards 888mm long and 148mm wide.
What is engineered herringbone flooring?
Engineered herringbone floors have a real timber top layer on a layered base. Swish Oak Natura Herringbone has a 3mm layer of genuine French oak on multiple layers of plywood, in a board 14mm thick, which the supplier says is more stable than solid oak.
Is engineered oak herringbone flooring real wood?
Yes. The wear layer is genuine French oak, 3mm thick, so the surface you see and walk on is real oak, with natural grain, knots and colour variation.
How much does herringbone flooring cost in Sydney?
There is no single price. It depends on the colour, the floor area, the existing floor, the preparation needed and the pattern, because herringbone flooring takes more time to lay than straight boards. Send your suburb, room sizes and a few photos, or visit our showroom, and we will quote your herringbone floor.
Is herringbone flooring harder to install?
It takes more care. The pattern has to be set out before gluing, there is more cutting at the walls, and Natura Herringbone is glued down, so a professional installer is the safer choice.
Do herringbone floors need glue?
Natura Herringbone boards are tongue and groove and are glued down to the subfloor. Every installation needs a moisture barrier, and on or below grade the adhesive must be compatible with it.
Can herringbone floorboards go over underfloor heating?
The supplier lists the floor as compatible with underfloor heating, and its manual allows in-slab heating to a maximum of 24°C. The supplier's warranty excludes floors installed over radiant heating, so we explain both before you decide.
What is the difference between herringbone and parquet flooring?
Herringbone is a type of parquet. Parquet means short boards laid in a pattern, and herringbone is the zig-zag version. If you are searching for parquet timber flooring in Sydney, herringbone is the pattern most people mean.
Can I sand engineered herringbone floors?
The 3mm oak wear layer can't be sanded as many times as solid timber, so ask us how you would refinish the floor before you choose. The boards come pre-finished, so they don't need sanding when they are laid.
Can I use herringbone flooring in a kitchen, bathroom or laundry?
The manufacturer recommends Swish Oak for dry interior areas only, and says it shouldn't be installed in bathrooms or laundries. We check each room before we quote.
What warranty comes with Swish Oak Natura Herringbone?
The supplier's catalogue gives a 25-year residential warranty for wear and structural integrity, subject to its terms. It needs correct installation, dry interior use, proper care and a year-round humidity of 40 to 60%.
Is the oak sustainably sourced?
The supplier's product pages say the raw materials are FSC sustainable, while its technical data sheet for the wide board line lists PEFC. Ask us for the certificate, and we will get it from the supplier.
Do you supply engineered timber flooring in Sydney?
Yes. We supply and install engineered timber flooring Sydney homes and businesses choose, including engineered oak flooring Sydney buyers ask about in herringbone and wide plank styles, and European oak engineered flooring in genuine French oak. Tell us your suburb and we will confirm we can get to you.
Do you supply and install herringbone flooring in Sydney?
Yes. We supply and install herringbone flooring in Sydney, NSW, including Parramatta, Blacktown, Burwood, Bankstown, Liverpool and the suburbs around them. Tell us your suburb and we will confirm we can get to you.