+61 415 779 146 Get a Quote ↗

Swish Oak Natura · French Carbon

French Carbon Engineered Oak Flooring

Dark engineered oak with dark grain lines. French Carbon is part of our Swish Oak Natura range, an engineered oak floor, 1900 x 190mm with a 3mm French oak wear layer, supplied and installed across Sydney.

  • 16 French oak colours
  • 1900 x 190mm boards
  • 14mm, 3mm oak layer
  • Click or glue down
  • 25-year residential warranty
French Carbon engineered oak flooring from the Swish Oak Natura range

Colours are shown as photographed and may look different in your home. Product images may differ from the actual product.

About this colour

About French Carbon Engineered Oak Flooring

French Carbon is a dark engineered oak with dark grain lines, a bold floor with a strong, graphic look.

French Carbon is supplier product code SNO-06, with a Valinge 5G click lock, so it floats over an underlay without glue, as an engineered timber floating floor. See French Carbon engineered oak planks if you want a dark, graphic oak floor. With 190mm boards in this tone, French Carbon suits feature rooms with good light, where a dark oak floor gives a strong base.

Styling French Carbon Engineered Oak Flooring

A dark oak suits white, pale grey and soft sand walls, with timber and brass accents. Good lighting brings out the grain, and pale textiles keep the room balanced.

Styling ideas for French Carbon

  • WallsWhite, pale grey or sand
  • AccentsTimber and brass
  • LightingLayered and warm

Where it works

French Carbon Engineered Oak Flooring for Sydney Homes

French Carbon engineered oak flooring suits living rooms, studies and entries, where a dark floor makes a strong first impression. Visit our Granville showroom to see French Carbon beside the other Swish Oak Natura colours. French Carbon sits in the dark group of the range, so it is worth comparing with Fiano Brown before you choose.

We supply and install French Carbon in Parramatta, Granville and Merrylands. Looking for engineered timber floors Sydney builders and owners specify in dark oak? Ask us about French Carbon. Because French Carbon floats over an underlay, it can suit renovations where a glued floor isn't practical, subject to the subfloor checks on this page.

Looking After French Carbon Engineered Oak Flooring

Dark floors show dust and pale marks, so sweep or vacuum often and wipe spills straight away. Use felt pads under furniture.

French Carbon is part of Swish Oak Natura, our engineered oak flooring, 1900 x 190mm boards with a 3mm French oak wear layer, supplied and installed across Sydney. See all our engineered oak flooring, or read about the Swish Oak Natura range.

The details

French Carbon Specifications

These specifications apply to French Carbon, from the manufacturer’s information.

  • 16 French oak colours
  • 3mm French oak layer
  • 1900 x 190mm boards
  • 25-year residential warranty
French Carbon engineered oak flooring: technical specifications
SpecificationSwish Oak Natura
TypeEngineered oak flooring
TimberGenuine French oak
Board size1900 x 190mm
Thickness14mm, with a 3mm French oak wear layer
ConstructionA 3mm French oak wear layer on multiple bonded layers of plywood
GradeABCD
Surface finishPre-finished. The supplier lists UV matt lacquered or oiled coatings (the catalogue lists 9 coats of matt UV lacquer), in natural, brushed, hand-scraped or stained finishes
EdgeMicro-bevelled
Locking system8 colours (SNO-01 to SNO-08) have a Valinge 5G click lock and float over an underlay without glue. 8 colours (SNO-09 to SNO-16) are tongue and groove, glued down or floated
Pack size2.90 m² (8 boards)
Pack weight25 kg on the product pages (the catalogue lists 23 kg)
EmissionsLow VOC, rated E1 (under 5ppm)
Underfloor heatingListed by the supplier as compatible, but the supplier's warranty excludes floors installed over radiant heating
ApplicationsDry interior areas of private homes and commercial establishments, for the Swish Oak line
Warranty25 years residential for wear and structural integrity from the supplier's catalogue, subject to its terms

Questions we get asked

French Carbon Engineered Oak Flooring FAQs

What rooms suit French Carbon engineered oak flooring?

French Carbon engineered oak flooring suits living rooms, studies and entries, where a dark floor makes a strong first impression. Visit our Granville showroom to see French Carbon beside the other Swish Oak Natura colours. French Carbon sits in the dark group of the range, so it is worth comparing with Fiano Brown before you choose. We check the room and the subfloor before we recommend a floor.

What wall colours go with French Carbon oak floorboards?

A dark oak suits white, pale grey and soft sand walls, with timber and brass accents. Good lighting brings out the grain, and pale textiles keep the room balanced.

How is French Carbon installed?

French Carbon has a Valinge 5G click lock, so it floats over an underlay on a moisture barrier, with a 10 to 15mm expansion gap around the room and no glue. We check your subfloor before we quote.

Is French Carbon real oak?

Yes. French Carbon has a 3mm wear layer of genuine French oak on multiple layers of plywood, in a board 1900mm long and 190mm wide, so this engineered timber flooring has a real oak surface.

Can I see a sample of French Carbon before I decide?

Ask us when you call or send your quote request, and mention French Carbon. Seeing French Carbon in your own light, next to your walls and furniture, is the easiest way to choose engineered oak flooring.

Ready when you are

Get a Quote for French Carbon

Tell us your suburb and the rooms you’re thinking about. We’ll call you, talk through French Carbon and the other options, and put a quote together for your place.

Request your quote

A short form. We’ll call you back to talk it through.

Please enter your name.
Please enter a valid number.
Please check your email address.
Please add your suburb.
Please choose one.

We use your details only to respond to your enquiry.

Thanks, we’ve got it.

Our team will call you to talk about your flooring.